Medieval Madness 'Shoot for Damsel' Install

Installation Guide

These instructions will guide you through the process of installing the Medieval Madness 'Shoot for Damsel' Mod. This guide is, as it's stated, a guide. Your free to follow your own ideas. If you have a great addition or you'll find info missing, please contact us and we'll do our best help you out.

ATTENTION: For best / easy installation it's recommended to remove the Medieval Madness Castle right side first.

1. Remove the backliner of the tiewrap base mount.

2. Stick the mod on outside top part of the Damsel assembly.

3. lead the wires down through the hole in the playfield to the Damsel Diverter Assembly. Connect the BLACK [mod] wire to the ORANGE [coil] wire. Connect the RED [mod] wire to the RED [coil] wire. Soldering these wires is prefered above using alligator-clips due to high voltage. Soldering gives better connections.

(The pic below comes from installing Troll heads, but the idea is the same...)

4. Use the tiewraps to bind the loose wires to the assembly & the leading wires to existing wire bundleds for neath and save wiring.


Alligator Clips Included are a set of Alligator Clips -> Allthough soldering wires to the GI is best for reliable connection, you may choose also to connect alligator clips to the wire ends and connect those to a GI bulb fitting. This benefits of an easy removable connection.





Do you want one? For ordering a Medieval Madness Pinball 'Shoot for Damsel' Mod got to our 'Shoot for Damsel' Mod order page.